Version 1 (modified by spascoe, 14 years ago) (diff)


Since GridFTP is supposed to do 3rd party data transfer I decided to take a look at  the specification and was surprised to discover that the FTP protocol already supports 3rd party transfer in theory, it is just rarely implemented.

Here is the relevant extract from  RFC 959:

      When data is to be transferred between two servers, A and B (refer
      to Figure 2), the user-PI, C, sets up control connections with
      both server-PI's.  One of the servers, say A, is then sent a PASV
      command telling him to "listen" on his data port rather than
      initiate a connection when he receives a transfer service command.
      When the user-PI receives an acknowledgment to the PASV command,
      which includes the identity of the host and port being listened
      on, the user-PI then sends A's port, a, to B in a PORT command; a
      reply is returned.  The user-PI may then send the corresponding
      service commands to A and B.  Server B initiates the connection
      and the transfer proceeds.  The command-reply sequence is listed
      below where the messages are vertically synchronous but
      horizontally asynchronous:

         User-PI - Server A                User-PI - Server B
         ------------------                ------------------

         C->A : Connect                    C->B : Connect
         C->A : PASV
         A->C : 227 Entering Passive Mode. A1,A2,A3,A4,a1,a2
                                           C->B : PORT A1,A2,A3,A4,a1,a2
                                           B->C : 200 Okay
         C->A : STOR                       C->B : RETR
                    B->A : Connect to HOST-A, PORT-a