source: FCC2/trunk/work/cmip5_vocabs/mip/CMIP5_6hrLev @ 41

Subversion URL: http://proj.badc.rl.ac.uk/svn/exarch/FCC2/trunk/work/cmip5_vocabs/mip/CMIP5_6hrLev@41
Revision 41, 16.8 KB checked in by mjuckes, 6 years ago (diff)

reworked and MIP tables added

Line 
1table_id: Table 6hrLev
2modeling_realm: atmos
3
4frequency: 6hr
5
6cmor_version: 2.6 ! minimum version of CMOR that can read this table
7cf_version:   1.4         ! version of CF that output conforms to
8project_id:   CMIP5  ! project id
9table_date:   22 March 2012 ! date this table was constructed
10
11missing_value: 1.e20      ! value used to indicate a missing value
12                          !   in arrays output by netCDF as 32-bit IEEE
13                          !   floating-point numbers (float or real)
14
15baseURL: http://cmip-pcmdi.llnl.gov/CMIP5/dataLocation
16product: output
17
18required_global_attributes: creation_date tracking_id forcing model_id parent_experiment_id parent_experiment_rip branch_time contact institute_id ! space separated required global attribute
19
20forcings:   N/A Nat Ant GHG SD SI SA TO SO Oz LU Sl Vl SS Ds BC MD OC AA
21
22expt_id_ok: '10- or 30-year run initialized in year XXXX' 'decadalXXXX'
23expt_id_ok: 'volcano-free hindcast initialized in year XXXX' 'noVolcXXXX'
24expt_id_ok: 'prediction with 2010 volcano' 'volcIn2010'
25expt_id_ok: 'pre-industrial control' 'piControl'
26expt_id_ok: 'historical' 'historical'
27expt_id_ok: 'historical extension' 'historicalExt'
28expt_id_ok: 'other historical forcing' 'historicalMisc'
29expt_id_ok: 'mid-Holocene' 'midHolocene'
30expt_id_ok: 'last glacial maximum' 'lgm'
31expt_id_ok: 'last millennium' 'past1000'
32expt_id_ok: 'RCP4.5' 'rcp45'
33expt_id_ok: 'RCP8.5' 'rcp85'
34expt_id_ok: 'RCP2.6' 'rcp26'
35expt_id_ok: 'RCP6' 'rcp60'
36expt_id_ok: 'ESM pre-industrial control' 'esmControl'
37expt_id_ok: 'ESM historical' 'esmHistorical'
38expt_id_ok: 'ESM RCP8.5' 'esmrcp85'
39expt_id_ok: 'ESM fixed climate 1' 'esmFixClim1'
40expt_id_ok: 'ESM fixed climate 2' 'esmFixClim2'
41expt_id_ok: 'ESM feedback 1' 'esmFdbk1'
42expt_id_ok: 'ESM feedback 2' 'esmFdbk2'
43expt_id_ok: '1 percent per year CO2' '1pctCO2'
44expt_id_ok: 'abrupt 4XCO2' 'abrupt4xCO2'
45expt_id_ok: 'natural-only' 'historicalNat'
46expt_id_ok: 'GHG-only' 'historicalGHG'
47expt_id_ok: 'AMIP' 'amip'
48expt_id_ok: '2030 time-slice' 'sst2030'
49expt_id_ok: 'control SST climatology' 'sstClim'
50expt_id_ok: 'CO2 forcing' 'sstClim4xCO2'
51expt_id_ok: 'all aerosol forcing' 'sstClimAerosol'
52expt_id_ok: 'sulfate aerosol forcing' 'sstClimSulfate'
53expt_id_ok: '4xCO2 AMIP' 'amip4xCO2'
54expt_id_ok: 'AMIP plus patterned anomaly' 'amipFuture'
55expt_id_ok: 'aqua planet control' 'aquaControl'
56expt_id_ok: '4xCO2 aqua planet' 'aqua4xCO2'
57expt_id_ok: 'aqua planet plus 4K anomaly' 'aqua4K'
58expt_id_ok: 'AMIP plus 4K anomaly' 'amip4K'
59
60
61approx_interval:  0.250000     ! approximate spacing between successive time
62                          !   samples (in units of the output time
63                          !   coordinate.
64
65generic_levels:   alevel
66
67!============
68axis_entry: longitude
69!============
70!----------------------------------
71! Axis attributes:
72!----------------------------------
73standard_name:    longitude
74units:            degrees_east
75axis:             X             ! X, Y, Z, T (default: undeclared)
76long_name:        longitude
77!----------------------------------
78! Additional axis information:
79!----------------------------------
80out_name:         lon
81valid_min:        0.0         
82valid_max:        360.0
83stored_direction: increasing
84type:             double
85must_have_bounds: yes
86!----------------------------------
87!
88
89
90!============
91axis_entry: latitude
92!============
93!----------------------------------
94! Axis attributes:
95!----------------------------------
96standard_name:    latitude
97units:            degrees_north
98axis:             Y             ! X, Y, Z, T (default: undeclared)
99long_name:        latitude
100!----------------------------------
101! Additional axis information:
102!----------------------------------
103out_name:         lat
104valid_min:        -90.0         
105valid_max:        90.0
106stored_direction: increasing
107type:             double
108must_have_bounds: yes
109!----------------------------------
110!
111
112
113!============
114axis_entry: time1
115!============
116!----------------------------------
117! Axis attributes:
118!----------------------------------
119standard_name:    time
120units:            days since ?
121axis:             T             ! X, Y, Z, T (default: undeclared)
122long_name:        time
123!----------------------------------
124! Additional axis information:
125!----------------------------------
126out_name:         time
127stored_direction: increasing
128type:             double
129must_have_bounds: no
130!----------------------------------
131!
132
133!============
134axis_entry: smooth_level
135!============
136!
137! This coordinate is a hybrid height coordinate with units of meters (m).
138!  It increases upward.
139!  The values of a(k)*ztop, which appear in the formula below, should be stored as smooth_level.
140!  Note that in the netCDF file the variable will be named "lev", not smooth_level.
141!
142!------------
143!
144! Axis attributes:
145!----------------------------------     
146standard_name:    atmosphere_sleve_coordinate
147units:            m
148axis:             Z
149positive:             up
150long_name:        atmosphere smooth level vertical (SLEVE) coordinate
151!----------------------------------     
152!
153! Additional axis information:
154!----------------------------------     
155out_name:         lev
156must_have_bounds: yes
157stored_direction: increasing
158valid_min:        -200.
159valid_max:        800000.
160formula:          z = a*ztop + b1*zsurf1 + b2*zsurf2
161z_factors:        a: a b1: b1 b2: b2 ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
162z_bounds_factors: a: a_bnds b1: b1_bnds b2: b2_bnds ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
163!----------------------------------     
164!
165!============
166axis_entry: natural_log_pressure
167!============
168!
169!This coordinate is dimensionless and varies from near 0 at the surface and increases upward.
170!  The values of lev(k), which appears in the formula below, should be stored as natural_log_pressure. 
171!  Note that in the netCDF file the variable will be named "lev", not natural_log_pressure.
172!
173!------------
174!
175! Axis attributes:
176!----------------------------------     
177standard_name:    atmosphere_ln_pressure_coordinate
178axis:             Z
179long_name:        atmosphere natural log pressure coordinate
180positive:             down
181!----------------------------------     
182!
183! Additional axis information:
184!----------------------------------     
185out_name:         lev
186must_have_bounds: yes
187stored_direction: decreasing
188valid_min:        -1.
189valid_max:        20.
190formula:          p = p0 * exp(-lev)
191z_factors:        p0: p0 lev: lev
192z_bounds_factors: p0: p0 lev: lev_bnds
193!----------------------------------     
194!
195!============
196axis_entry: standard_sigma
197!============
198!
199! This coordinate is dimensionless and varies from 0 at the model top to 1.0 at the surface.
200!  The values of sigma(k), which appears in the formula below, should be stored as standard_sigma. 
201!  Note that in the netCDF file the variable will be named "lev", not standard_sigma.
202!
203!------------
204!
205! Axis attributes:
206!----------------------------------     
207standard_name:    atmosphere_sigma_coordinate
208axis:             Z
209positive:         down
210long_name:        sigma coordinate
211!----------------------------------     
212!
213! Additional axis information:
214!----------------------------------     
215out_name:         lev
216must_have_bounds: yes
217stored_direction: decreasing
218valid_min:        0.0
219valid_max:        1.0
220formula:          p = ptop + sigma*(ps - ptop)
221z_factors:        ptop: ptop sigma: lev ps: ps
222z_bounds_factors: ptop: ptop sigma: lev_bnds ps: ps
223!----------------------------------     
224!
225!
226!============
227axis_entry:  standard_hybrid_sigma
228!============
229!
230! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
231!  The values of a+ b, which appear in the formula below, should be stored as standard_hybrid_sigma. 
232!  Note that in the netCDF file the variable will be named "lev", not standard_hybrid_sigma.
233!
234!---------------------------------
235! Axis attributes:
236!----------------------------------     
237standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
238units:            1
239axis:             Z
240positive:         down
241long_name:        hybrid sigma pressure coordinate
242!----------------------------------
243! Additional axis information:
244!----------------------------------     
245out_name:         lev
246must_have_bounds: yes
247stored_direction: decreasing
248valid_min:        0.0
249valid_max:        1.0
250formula:          p = a*p0 + b*ps
251z_factors:        p0: p0 a: a b: b ps: ps
252z_bounds_factors: p0: p0 a: a_bnds b: b_bnds ps: ps
253!----------------------------------             
254!
255!
256!============
257axis_entry:  alternate_hybrid_sigma
258!============
259!
260! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
261!  The values of ap/p0 + b, which appear in the formula below, should be stored as alternate_hybrid_sigma. 
262!  Note that in the netCDF file the variable will be named "lev", not alternate_hybrid_sigma.
263!
264!------------
265!
266! Axis attributes:
267!----------------------------------     
268standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
269units:            1
270axis:             Z
271positive:         down
272long_name:        hybrid sigma pressure coordinate
273!----------------------------------     
274!
275! Additional axis information:
276!----------------------------------     
277out_name:         lev
278must_have_bounds: yes
279stored_direction: decreasing
280valid_min:        0.0
281valid_max:        1.0
282formula:          p = ap + b*ps
283z_factors:        ap: ap b: b ps: ps
284z_bounds_factors: ap: ap_bnds b: b_bnds ps: ps
285!----------------------------------             
286!
287!
288!============
289axis_entry:  hybrid_height
290!============
291!
292! This coordinate has dimension of meters (m) and increases upward.
293!  The values of a which appear in the formula below, should be stored as hybrid_height. 
294!  Note that in the netCDF file the variable will be named "lev", not hybrid_height.
295!
296!------------
297!
298! Axis attributes:
299!----------------------------------     
300standard_name:    atmosphere_hybrid_height_coordinate
301units:            m
302axis:             Z
303positive:         up
304long_name:        hybrid height coordinate
305!----------------------------------     
306!
307! Additional axis information:
308!----------------------------------     
309out_name:         lev
310must_have_bounds: yes
311stored_direction: increasing
312valid_min:        0.0
313formula:          z = a + b*orog
314z_factors:        a: lev b: b orog: orog
315z_bounds_factors: a: lev_bnds b: b_bnds orog: orog
316!----------------------------------             
317!
318! ***************************************************************
319!
320! Vertical coordinate formula terms:
321!
322! ***************************************************************
323!
324!
325!============
326variable_entry:    orog
327!============
328modeling_realm:    atmos
329!----------------------------------
330! Variable attributes:
331!----------------------------------
332standard_name:     surface_altitude
333units:             m
334long_name:         Surface Altitude
335comment:           height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean).  Report here the height above the present-day geoid.  Over ocean, report as 0.0
336!----------------------------------
337! Additional variable information:
338!----------------------------------
339dimensions:        longitude latitude
340out_name:          orog
341type:              real
342valid_min:         -700
343valid_max:         1.00E+04
344!----------------------------------
345!
346!
347!============
348variable_entry: p0
349!============
350!------------
351!
352! Variable attributes:
353!----------------------------------     
354long_name:       vertical coordinate formula term: reference pressure
355units:           Pa
356!----------------------------------     
357!
358!
359!============
360variable_entry: ptop
361!============
362!
363!------------
364!
365! Variable attributes:
366!----------------------------------     
367long_name:       pressure at top of model
368units:           Pa
369!----------------------------------     
370!
371!
372!
373!============
374variable_entry: a
375!============
376!------------
377!
378! Variable attributes:
379!----------------------------------     
380long_name:   vertical coordinate formula term: a(k)
381!----------------------------------     
382!
383! Additional variable information:
384!----------------------------------     
385dimensions:         alevel
386type:               double
387!----------------------------------     
388!
389!
390!============
391variable_entry: b
392!============
393!------------
394!
395! Variable attributes:
396!----------------------------------     
397long_name:   vertical coordinate formula term: b(k)
398!----------------------------------     
399!
400! Additional variable information:
401!----------------------------------     
402dimensions:         alevel
403type:               double
404!----------------------------------     
405!
406!
407!============
408variable_entry: a_bnds
409!============
410!
411!------------
412!
413! Variable attributes:
414!----------------------------------     
415long_name:   vertical coordinate formula term: a(k+1/2)
416!----------------------------------     
417!
418! Additional variable information:
419!----------------------------------     
420dimensions:         alevel
421type:               double
422!----------------------------------     
423!
424!
425!============
426variable_entry: b_bnds
427!============
428!
429!------------
430!
431! Variable attributes:
432!----------------------------------     
433long_name:   vertical coordinate formula term: b(k+1/2)
434!----------------------------------     
435!
436! Additional variable information:
437!----------------------------------     
438dimensions:         alevel
439type:               double
440!----------------------------------
441!
442!
443!============
444variable_entry: ap
445!============
446!
447! Variable attributes:
448!----------------------------------     
449long_name:   vertical coordinate formula term: ap(k)
450units:           Pa
451!----------------------------------     
452!
453! Additional variable information:
454!----------------------------------     
455dimensions:         alevel
456type:               double
457!----------------------------------     
458!
459!
460!============
461variable_entry: ap_bnds
462!============
463!
464! Variable attributes:
465!----------------------------------     
466long_name:   vertical coordinate formula term: ap(k+1/2)
467units:           Pa
468!----------------------------------     
469!
470! Additional variable information:
471!----------------------------------     
472dimensions:         alevel
473type:               double
474!----------------------------------     
475!
476!
477!============
478variable_entry: ztop
479!============
480!
481!------------
482!
483! Variable attributes:
484!----------------------------------     
485long_name:       height of top of model
486units:           m
487!----------------------------------     
488!
489!
490!
491
492!============
493variable_entry:    ta
494!============
495modeling_realm:    atmos
496!----------------------------------
497! Variable attributes:
498!----------------------------------
499standard_name:     air_temperature
500units:             K
501cell_measures:     area: areacella
502long_name:         Air Temperature
503!----------------------------------
504! Additional variable information:
505!----------------------------------
506dimensions:        longitude latitude alevel time1
507out_name:          ta
508type:              real
509!----------------------------------
510!
511
512!============
513variable_entry:    ua
514!============
515modeling_realm:    atmos
516!----------------------------------
517! Variable attributes:
518!----------------------------------
519standard_name:     eastward_wind
520units:             m s-1
521long_name:         Eastward Wind
522!----------------------------------
523! Additional variable information:
524!----------------------------------
525dimensions:        longitude latitude alevel time1
526out_name:          ua
527type:              real
528!----------------------------------
529!
530
531!============
532variable_entry:    va
533!============
534modeling_realm:    atmos
535!----------------------------------
536! Variable attributes:
537!----------------------------------
538standard_name:     northward_wind
539units:             m s-1
540long_name:         Northward Wind
541!----------------------------------
542! Additional variable information:
543!----------------------------------
544dimensions:        longitude latitude alevel time1
545out_name:          va
546type:              real
547!----------------------------------
548!
549
550!============
551variable_entry:    hus
552!============
553modeling_realm:    atmos
554!----------------------------------
555! Variable attributes:
556!----------------------------------
557standard_name:     specific_humidity
558units:             1
559cell_measures:     area: areacella
560long_name:         Specific Humidity
561!----------------------------------
562! Additional variable information:
563!----------------------------------
564dimensions:        longitude latitude alevel time1
565out_name:          hus
566type:              real
567!----------------------------------
568!
569
570!============
571variable_entry:    ps
572!============
573modeling_realm:    atmos
574!----------------------------------
575! Variable attributes:
576!----------------------------------
577standard_name:     surface_air_pressure
578units:             Pa
579cell_measures:     area: areacella
580long_name:         Surface Air Pressure
581comment:           surface pressure, not mean sea level pressure
582!----------------------------------
583! Additional variable information:
584!----------------------------------
585dimensions:        longitude latitude time1
586out_name:          ps
587type:              real
588!----------------------------------
589!
590
Note: See TracBrowser for help on using the repository browser.