source: CCCC/trunk/ceda_cc/config/ccmi_vocabs/mip/CCMI1_hourly @ 690

Subversion URL: http://proj.badc.rl.ac.uk/svn/exarch/CCCC/trunk/ceda_cc/config/ccmi_vocabs/mip/CCMI1_hourly@690
Revision 690, 24.3 KB checked in by mjuckes, 4 years ago (diff)

CCMI table updated

Line 
1cmor_version: 2.5.0    ! minimum version of CMOR that can read this table
2cf_version:   1.4      ! version of CF that output conforms to
3project_id:   CCMI1    ! project id
4table_id:     hourly   ! table id
5table_date:   17 May 2016 ! date this table was constructed
6modeling_realm: atmos
7frequency: hr
8
9expt_id_ok:  'Hindcast' 'refC1'
10expt_id_ok:  'Hindcast - Specified Dynamics' 'refC1SD'
11expt_id_ok:  'Projection' 'refC2'
12expt_id_ok:  'Hindcast Scenario - altEmis' 'senC1Emis'
13expt_id_ok:  'HindcastSD Scenario - altEmis' 'senC1SDEmis'
14expt_id_ok:  'Hindcast Scenario - fxdEmis' 'senC1fEmis'
15expt_id_ok:  'HindcastSD Scenario - fxdEmis' 'senC1SDfEmis'
16expt_id_ok:  'Hindcast Scenario - altSSI' 'senC1SSI'
17expt_id_ok:  'Projection Scenario - RCP2.6' 'senC2rcp26'
18expt_id_ok:  'Projection Scenario - RCP4.5' 'senC2rcp45'
19expt_id_ok:  'Projection Scenario - RCP8.5' 'senC2rcp85'
20expt_id_ok:  'Projection Scenario - fxdODS' 'senC2fODS'
21expt_id_ok:  'Projection Scenario - fxdODS2000' 'senC2fODS2000'
22expt_id_ok:  'Projection Scenario - fxdGHG' 'senC2fGHG'
23expt_id_ok:  'Projection Scenario - fxdEmis' 'senC2fEmis'
24expt_id_ok:  'Projection Scenario - fxdN2O' 'senC2fN2O'
25expt_id_ok:  'Projection Scenario - fxdCH4' 'senC2fCH4'
26expt_id_ok:  'Projection Scenario - GeoMIP-G1' 'senC2GeoMIPG1'
27expt_id_ok:  'Projection Scenario - GeoMIP-G2' 'senC2GeoMIPG2'
28expt_id_ok:  'Projection Scenario - GeoMIP-G3' 'senC2GeoMIPG3'
29expt_id_ok:  'Projection Scenario - GeoMIP-G4' 'senC2GeoMIPG4'
30expt_id_ok:  'Projection Scenario - SolarTrend' 'senC2SlrTrend'
31
32approx_interval:  0.042   ! approximate spacing between successive time
33                          !   samples (in units of the output time
34                          !   coordinate)
35
36missing_value: 1.e20      ! value used to indicate a missing value
37                          !   in arrays output by netCDF as 32-bit IEEE
38                          !   floating-point numbers (float or real)
39
40baseURL: http://www.met.reading.ac.uk/ccmi/   
41product: output
42
43required_global_attributes: creation_date tracking_id forcing model_id parent_experiment_id parent_experiment_rip branch_time contact institute_id ! space separated required global attribute
44
45generic_levels:   alevel alev1
46
47!============
48axis_entry: longitude
49!============
50!----------------------------------
51! Axis attributes:
52!----------------------------------
53standard_name:    longitude
54units:            degrees_east
55axis:             X             ! X, Y, Z, T (default: undeclared)
56long_name:        longitude
57!----------------------------------
58! Additional axis information:
59!----------------------------------
60out_name:         lon
61valid_min:        0.0         
62valid_max:        360.0
63stored_direction: increasing
64type:             double
65must_have_bounds: yes
66!----------------------------------
67!
68
69
70!============
71axis_entry: latitude
72!============
73!----------------------------------
74! Axis attributes:
75!----------------------------------
76standard_name:    latitude
77units:            degrees_north
78axis:             Y             ! X, Y, Z, T (default: undeclared)
79long_name:        latitude
80!----------------------------------
81! Additional axis information:
82!----------------------------------
83out_name:         lat
84valid_min:        -90.0         
85valid_max:        90.0
86stored_direction: increasing
87type:             double
88must_have_bounds: yes
89!----------------------------------
90!
91
92!============
93axis_entry: plevs
94!============
95!----------------------------------
96! Axis attributes:
97!----------------------------------
98standard_name:    air_pressure
99units:            Pa
100axis:             Z             ! X, Y, Z, T (default: undeclared)
101positive:         down         ! up or down (default: undeclared)
102long_name:        pressure
103!----------------------------------
104! Additional axis information:
105!----------------------------------
106out_name:         plev
107stored_direction: decreasing
108tolerance:        0.001
109type:             double
110requested:        100000. 85000. 70000. 50000. 40000. 30000. 25000. 20000. 17000. 15000. 13000. 11500. 10000. 9000. 8000. 7000. 5000. 3000. 2000. 1500. 1000. 700. 500. 300. 200. 150. 100. 50. 30. 20. 10.       ! space-separated list of requested coordinates
111must_have_bounds: no
112!----------------------------------
113!
114
115!============
116axis_entry: pr100
117!============
118!----------------------------------
119! Axis attributes:
120!----------------------------------
121standard_name:    air_pressure
122units:            Pa
123axis:             Z             ! X, Y, Z, T (default: undeclared)
124positive:         down         ! up or down (default: undeclared)
125long_name:        pressure
126!----------------------------------
127! Additional axis information:
128!----------------------------------
129out_name:         plev
130stored_direction: decreasing
131tolerance:        0.001
132type:             double
133value:            10000.            ! of scalar (singleton) dimension
134must_have_bounds: no
135!----------------------------------
136!
137
138!============
139axis_entry: time
140!============
141!----------------------------------
142! Axis attributes:
143!----------------------------------
144standard_name:    time
145units:            days since ?
146axis:             T             ! X, Y, Z, T (default: undeclared)
147long_name:        time
148!----------------------------------
149! Additional axis information:
150!----------------------------------
151out_name:         time
152stored_direction: increasing
153type:             double
154must_have_bounds: yes
155!----------------------------------
156!
157
158!============
159axis_entry: time1
160!============
161!----------------------------------
162! Axis attributes:
163!----------------------------------
164standard_name:    time
165units:            days since ?
166axis:             T             ! X, Y, Z, T (default: undeclared)
167long_name:        time
168!----------------------------------
169! Additional axis information:
170!----------------------------------
171out_name:         time
172stored_direction: increasing
173type:             double
174must_have_bounds: no
175!----------------------------------
176!
177
178!============
179axis_entry: smooth_level
180!============
181!
182! This coordinate is a hybrid height coordinate with units of meters (m).
183!  It increases upward.
184!  The values of a(k)*ztop, which appear in the formula below, should be stored as smooth_level.
185!  Note that in the netCDF file the variable will be named "lev", not smooth_level.
186!
187!------------
188!
189! Axis attributes:
190!----------------------------------     
191standard_name:    atmosphere_sleve_coordinate
192units:            m
193axis:             Z
194positive:             up
195long_name:        atmosphere smooth level vertical (SLEVE) coordinate
196!----------------------------------     
197!
198! Additional axis information:
199!----------------------------------     
200out_name:         lev
201must_have_bounds: yes
202stored_direction: increasing
203valid_min:        -200.
204valid_max:        800000.
205formula:          z(n,k,j,i) = a(k)*ztop + b1(k)*zsurf1(n,j,i) + b2(k)*zsurf2(n,j,i)
206z_factors:        a: a b1: b1 b2: b2 ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
207z_bounds_factors: a: a_bnds b1: b1_bnds b2: b2_bnds ztop: ztop zsurf1: zsurf1 zsurf2: zsurf2
208!----------------------------------     
209!
210!============
211axis_entry: natural_log_pressure
212!============
213!
214!This coordinate is dimensionless and varies from near 0 at the surface and increases upward.
215!  The values of lev(k), which appears in the formula below, should be stored as natural_log_pressure. 
216!  Note that in the netCDF file the variable will be named "lev", not natural_log_pressure.
217!
218!------------
219!
220! Axis attributes:
221!----------------------------------     
222standard_name:    atmosphere_ln_pressure_coordinate
223axis:             Z
224long_name:        atmosphere natural log pressure coordinate
225positive:             down
226!----------------------------------     
227!
228! Additional axis information:
229!----------------------------------     
230out_name:         lev
231must_have_bounds: yes
232stored_direction: decreasing
233valid_min:        -1.
234valid_max:        20.
235formula:          p(k) = p0 * exp(-lev(k))
236z_factors:        p0: p0 lev: lev
237z_bounds_factors: p0: p0 lev: lev_bnds
238!----------------------------------     
239!
240!============
241axis_entry: standard_sigma
242!============
243!
244! This coordinate is dimensionless and varies from 0 at the model top to 1.0 at the surface.
245!  The values of sigma(k), which appears in the formula below, should be stored as standard_sigma. 
246!  Note that in the netCDF file the variable will be named "lev", not standard_sigma.
247!
248!------------
249!
250! Axis attributes:
251!----------------------------------     
252standard_name:    atmosphere_sigma_coordinate
253axis:             Z
254positive:         down
255long_name:        sigma coordinate
256!----------------------------------     
257!
258! Additional axis information:
259!----------------------------------     
260out_name:         lev
261must_have_bounds: yes
262stored_direction: decreasing
263valid_min:        0.0
264valid_max:        1.0
265formula:          p(n,k,j,i) = ptop + sigma(k)*(ps(n,j,i) - ptop)
266z_factors:        ptop: ptop sigma: lev ps: ps
267z_bounds_factors: ptop: ptop sigma: lev_bnds ps: ps
268!----------------------------------     
269!
270!
271!============
272axis_entry:  standard_hybrid_sigma
273!============
274!
275! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
276!  The values of a(k)+ b(k), which appear in the formula below, should be stored as standard_hybrid_sigma. 
277!  Note that in the netCDF file the variable will be named "lev", not standard_hybrid_sigma.
278!
279!---------------------------------
280! Axis attributes:
281!----------------------------------     
282standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
283units:            1
284axis:             Z
285positive:         down
286long_name:        hybrid sigma pressure coordinate
287!----------------------------------
288! Additional axis information:
289!----------------------------------     
290out_name:         lev
291must_have_bounds: yes
292stored_direction: decreasing
293valid_min:        0.0
294valid_max:        1.0
295formula:          p(n,k,j,i) = a(k)*p0 + b(k)*ps(n,j,i)
296z_factors:        p0: p0 a: a b: b ps: ps
297z_bounds_factors: p0: p0 a: a_bnds b: b_bnds ps: ps
298!----------------------------------             
299!
300!
301!============
302axis_entry:  alternate_hybrid_sigma
303!============
304!
305! This coordinate is dimensionless and varies from a small value at the model top to 1.0 at the surface.
306!  The values of ap(k)/p0 + b(k), which appear in the formula below, should be stored as alternate_hybrid_sigma. 
307!  Note that in the netCDF file the variable will be named "lev", not alternate_hybrid_sigma.
308!
309!------------
310!
311! Axis attributes:
312!----------------------------------     
313standard_name:    atmosphere_hybrid_sigma_pressure_coordinate
314units:            1
315axis:             Z
316positive:         down
317long_name:        hybrid sigma pressure coordinate
318!----------------------------------     
319!
320! Additional axis information:
321!----------------------------------     
322out_name:         lev
323must_have_bounds: yes
324stored_direction: decreasing
325valid_min:        0.0
326valid_max:        1.0
327formula:          p(n,k,j,i) = ap(k) + b(k)*ps(n,j,i)
328z_factors:        ap: ap b: b ps: ps
329z_bounds_factors: ap: ap_bnds b: b_bnds ps: ps
330!----------------------------------             
331!
332!
333!============
334axis_entry:  hybrid_height
335!============
336!
337! This coordinate has dimension of meters (m) and increases upward.
338!  The values of a(k) which appear in the formula below, should be stored as hybrid_height. 
339!  Note that in the netCDF file the variable will be named "lev", not hybrid_height.
340!
341!------------
342!
343! Axis attributes:
344!----------------------------------     
345standard_name:    atmosphere_hybrid_height_coordinate
346units:            m
347axis:             Z
348positive:         up
349long_name:        hybrid height coordinate
350!----------------------------------     
351!
352! Additional axis information:
353!----------------------------------     
354out_name:         lev
355must_have_bounds: yes
356stored_direction: increasing
357valid_min:        0.0
358formula:          z(k,j,i) = a(k) + b(k)*orog(j,i)
359z_factors:        a: lev b: b orog: orog
360z_bounds_factors: a: lev_bnds b: b_bnds orog: orog
361!----------------------------------             
362!
363! ***************************************************************
364!
365! Vertical coordinate formula terms:
366!
367! ***************************************************************
368!
369!
370!============
371variable_entry:    orog
372!============
373modeling_realm:    atmos
374!----------------------------------
375! Variable attributes:
376!----------------------------------
377standard_name:     surface_altitude
378units:             m
379long_name:         Surface Altitude
380comment:           height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean).  Report here the height above the present-day geoid.  Over ocean, report as 0.0
381!----------------------------------
382! Additional variable information:
383!----------------------------------
384dimensions:        longitude latitude
385out_name:          orog
386type:              real
387valid_min:         -700
388valid_max:         1.00E+04
389!----------------------------------
390!
391!
392!============
393variable_entry: p0
394!============
395!------------
396!
397! Variable attributes:
398!----------------------------------     
399long_name:       vertical coordinate formula term: reference pressure
400units:           Pa
401!----------------------------------     
402!
403!
404!============
405variable_entry: ptop
406!============
407!
408!------------
409!
410! Variable attributes:
411!----------------------------------     
412long_name:       pressure at top of model
413units:           Pa
414!----------------------------------     
415!
416!
417!
418!============
419variable_entry: a
420!============
421!------------
422!
423! Variable attributes:
424!----------------------------------     
425long_name:   vertical coordinate formula term: a(k)
426units:        1
427!----------------------------------     
428!
429! Additional variable information:
430!----------------------------------     
431dimensions:         alevel
432type:               double
433!----------------------------------     
434!
435!
436!============
437variable_entry: b
438!============
439!------------
440!
441! Variable attributes:
442!----------------------------------     
443long_name:   vertical coordinate formula term: b(k)
444units:        1
445!----------------------------------     
446!
447! Additional variable information:
448!----------------------------------     
449dimensions:         alevel
450type:               double
451!----------------------------------     
452!
453!
454!============
455variable_entry: a_bnds
456!============
457!
458!------------
459!
460! Variable attributes:
461!----------------------------------     
462long_name:   vertical coordinate formula term: a(k+1/2)
463units:        1
464!----------------------------------     
465!
466! Additional variable information:
467!----------------------------------     
468dimensions:         alevel
469type:               double
470!----------------------------------     
471!
472!
473!============
474variable_entry: b_bnds
475!============
476!
477!------------
478!
479! Variable attributes:
480!----------------------------------     
481long_name:   vertical coordinate formula term: b(k+1/2)
482units:        1
483!----------------------------------     
484!
485! Additional variable information:
486!----------------------------------     
487dimensions:         alevel
488type:               double
489!----------------------------------
490!
491!
492!============
493variable_entry: ap
494!============
495!
496! Variable attributes:
497!----------------------------------     
498long_name:   vertical coordinate formula term: ap(k)
499units:           Pa
500!----------------------------------     
501!
502! Additional variable information:
503!----------------------------------     
504dimensions:         alevel
505type:               double
506!----------------------------------     
507!
508!
509!============
510variable_entry: ap_bnds
511!============
512!
513! Variable attributes:
514!----------------------------------     
515long_name:   vertical coordinate formula term: ap(k+1/2)
516units:           Pa
517!----------------------------------     
518!
519! Additional variable information:
520!----------------------------------     
521dimensions:         alevel
522type:               double
523!----------------------------------     
524!
525!
526!============
527variable_entry: ztop
528!============
529!
530!------------
531!
532! Variable attributes:
533!----------------------------------     
534long_name:       height of top of model
535units:           m
536!----------------------------------     
537!
538!
539! ------- Requested CCMI time variables
540!
541!
542!============
543variable_entry: ccmi_year
544!============
545!------------
546!
547! Variable attributes:
548!----------------------------------
549long_name:       CCMI Year
550comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
551units:           year
552dimensions:      time
553type:            integer
554!----------------------------------
555!
556!
557!============
558variable_entry: ccmi_month
559!============
560!------------
561!
562! Variable attributes:
563!----------------------------------
564long_name:       CCMI Month
565comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
566units:           month
567dimensions:      time
568type:            integer
569!----------------------------------
570!
571!
572!============
573variable_entry: ccmi_day
574!============
575!------------
576!
577! Variable attributes:
578!----------------------------------
579long_name:       CCMI Day
580comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
581units:           day
582dimensions:      time
583type:            integer
584!----------------------------------
585!
586!
587!============
588variable_entry: ccmi_hour
589!============
590!------------
591!
592! Variable attributes:
593!----------------------------------
594long_name:       CCMI Hour
595comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
596units:           hour
597dimensions:      time
598type:            integer
599!----------------------------------
600!
601!
602!============
603variable_entry: ccmi_minute
604!============
605!------------
606!
607! Variable attributes:
608!----------------------------------
609long_name:       CCMI Minute
610comment:         These are what each model believes the date/time (Gregorian calendar) to be at the middle of each time interval in the output (GMT, not local time).
611units:           minute
612dimensions:      time
613type:            integer
614!----------------------------------
615!
616!============
617variable_entry:    ps
618!============
619modeling_realm:    atmos
620!----------------------------------
621! Variable attributes:
622!----------------------------------
623standard_name:     surface_air_pressure
624units:             Pa
625cell_methods:      time: point
626cell_measures:     area: areacella
627long_name:         Surface Air Pressure
628comment:           surface pressure (not mean sea-level pressure), 2-D field to calculate the 3-D pressure field from hybrid coordinates
629!----------------------------------
630! Additional variable information:
631!----------------------------------
632dimensions:        longitude latitude time1
633type:              real
634valid_min:         0
635valid_max:         1000000
636!----------------------------------
637!
638
639!============
640variable_entry:    sfvmro3
641!============
642modeling_realm:    atmos
643!----------------------------------
644! Variable attributes:
645!----------------------------------
646standard_name:     mole_fraction_of_ozone_in_air
647units:             mole mole-1
648cell_methods:      time: point
649cell_measures:     area: areacella
650long_name:         Ozone Volume Mixing Ratio in the Lowest Model Layer
651comment:           
652!----------------------------------
653! Additional variable information:
654!----------------------------------
655dimensions:        longitude latitude time1
656type:              real
657valid_min:         0
658valid_max:         1
659!----------------------------------
660!
661
662!============
663variable_entry:    sfvmrno2
664!============
665modeling_realm:    atmos
666!----------------------------------
667! Variable attributes:
668!----------------------------------
669standard_name:     mole_fraction_of_nitrogen_dioxide_in_air
670units:             mole mole-1
671cell_methods:      time: point
672cell_measures:     area: areacella
673long_name:         NO2 Volume Mixing Ratio in the Lowest Model Layer
674comment:           
675!----------------------------------
676! Additional variable information:
677!----------------------------------
678dimensions:        longitude latitude time1
679type:              real
680valid_min:         0
681valid_max:         1
682!----------------------------------
683!
684
685!============
686variable_entry:    sfvmrco
687!============
688modeling_realm:    atmos
689!----------------------------------
690! Variable attributes:
691!----------------------------------
692standard_name:     mole_fraction_of_carbon_monoxide_in_air
693units:             mole mole-1
694cell_methods:      time: point
695cell_measures:     area: areacella
696long_name:         CO Volume Mixing Ratio in the Lowest Model Layer
697comment:           
698!----------------------------------
699! Additional variable information:
700!----------------------------------
701dimensions:        longitude latitude time1
702type:              real
703valid_min:         0
704valid_max:         1
705!----------------------------------
706!
707
708!============
709variable_entry:    sfmmrpm2p5
710!============
711modeling_realm:    atmos
712!----------------------------------
713! Variable attributes:
714!----------------------------------
715standard_name:     mass_fraction_of_pm2p5_ambient_aerosol_in_air
716units:             kg kg-1
717cell_methods:      time: point
718cell_measures:     area: areacella
719long_name:         PM2.5 Mass Mixing Ratio in the Lowest Model Layer
720comment:           
721!----------------------------------
722! Additional variable information:
723!----------------------------------
724dimensions:        longitude latitude time1
725type:              real
726valid_min:         0
727valid_max:         1
728!----------------------------------
729!
730
731!============
732variable_entry:    dryo3
733!============
734modeling_realm:    atmos
735!----------------------------------
736! Variable attributes:
737!----------------------------------
738standard_name:     tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition
739units:             kg m-2 s-1
740cell_methods:      time: point
741cell_measures:     area: areacella
742long_name:         Dry Deposition Rate of O3
743comment:           Only for year 2006. dry deposition includes gravitational settling, impact scavenging, and turbulent deposition.
744!----------------------------------
745! Additional variable information:
746!----------------------------------
747dimensions:        longitude latitude time1
748type:              real
749positive:          down
750valid_min:         0
751valid_max:         1000000
752!----------------------------------
753!
754
755!============
756variable_entry:    gsto
757!============
758modeling_realm:    atmos
759!----------------------------------
760! Variable attributes:
761!----------------------------------
762!FAILS CF25 standard_name:     stomatal_conductance_of_water_vapour_per_unit_leaf_area
763units:             mmol m-2 s-1
764cell_methods:      time: point
765cell_measures:     area: areacella
766long_name:         Stomatal Conductance of Water Vapour
767comment:           Only for year 2006.  Full units are mmol H2O/m^2 leaf area/sec.
768!----------------------------------
769! Additional variable information:
770!----------------------------------
771dimensions:        longitude latitude time1
772type:              real
773valid_min:         0
774valid_max:         1000000
775!----------------------------------
776!
777
778!============
779variable_entry:    stoo3
780!============
781modeling_realm:    atmos
782!----------------------------------
783! Variable attributes:
784!----------------------------------
785standard_name:     tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition_into_stomata
786units:             kg m-2 s-1
787cell_methods:      time: point
788cell_measures:     area: areacella
789long_name:         Dry Deposition Rate of O3 in Stomata
790comment:           Only for year 2006
791!----------------------------------
792! Additional variable information:
793!----------------------------------
794dimensions:        longitude latitude time1
795type:              real
796positive:          down
797valid_min:         0
798valid_max:         1000000
799!----------------------------------
800!
801
802!============
803variable_entry:    vmro3cnp
804!============
805modeling_realm:    atmos
806!----------------------------------
807! Variable attributes:
808!----------------------------------
809standard_name:     mole_fraction_of_ozone_in_air
810units:             mole mole-1
811cell_methods:      time: point
812cell_measures:     area: areacella
813long_name:         Ozone Volume Mixing Ratio at Canopy Height
814comment:           Only for year 2006
815!----------------------------------
816! Additional variable information:
817!----------------------------------
818dimensions:        longitude latitude time1
819type:              real
820valid_min:         0
821valid_max:         1
822!----------------------------------
823!
824
Note: See TracBrowser for help on using the repository browser.