source: CCCC/branches/branch-sp/ceda_cc/config/cordex_vocabs/mip/CORDEX_fx @ 163

Subversion URL: http://proj.badc.rl.ac.uk/svn/exarch/CCCC/branches/branch-sp/ceda_cc/config/cordex_vocabs/mip/CORDEX_fx@163
Revision 163, 7.2 KB checked in by spascoe, 6 years ago (diff)

Moving config dir inside the package dir

Line 
1table_id: Table fx
2modeling_realm: atmos
3
4frequency: fx
5
6cmor_version: 2.5.0 ! minimum version of CMOR that can read this table
7cf_version:   1.4         ! version of CF that output conforms to
8project_id:   CORDEX  ! project id
9table_date:   Sept 2013 ! date this table was constructed
10
11missing_value: 1.e20      ! value used to indicate a missing value
12                          !   in arrays output by netCDF as 32-bit IEEE
13                          !   floating-point numbers (float or real)
14
15! CMIP5's Table adapted for CORDEX
16required_global_attributes: creation_date tracking_id model_id contact institute_id ! space separated required global attribut
17
18expt_id_ok: 'Evaluation run with reanalysis forcing' 'evaluation'
19expt_id_ok: 'historical' 'historical'
20expt_id_ok: 'RCP4.5' 'rcp45'
21expt_id_ok: 'RCP8.5' 'rcp85'
22expt_id_ok: 'AMIP' 'amip'
23expt_id_ok: '10- or 30-year run initialized in year XXXX' 'decadalXXXX'
24
25product: output
26
27approx_interval:  0.000000     ! approximate spacing between successive time
28                          !   samples (in units of the output time
29                          !   coordinate.
30
31!============
32axis_entry: longitude
33!============
34!----------------------------------
35! Axis attributes:
36!----------------------------------
37standard_name:    longitude
38units:            degrees_east
39axis:             X             ! X, Y, Z, T (default: undeclared)
40long_name:        longitude
41!----------------------------------
42! Additional axis information:
43!----------------------------------
44out_name:         lon
45stored_direction: increasing
46type:             double
47must_have_bounds: yes
48!----------------------------------
49!
50
51
52!============
53axis_entry: latitude
54!============
55!----------------------------------
56! Axis attributes:
57!----------------------------------
58standard_name:    latitude
59units:            degrees_north
60axis:             Y             ! X, Y, Z, T (default: undeclared)
61long_name:        latitude
62!----------------------------------
63! Additional axis information:
64!----------------------------------
65out_name:         lat
66valid_min:        -90.0         
67valid_max:        90.0
68stored_direction: increasing
69type:             double
70must_have_bounds: yes
71!----------------------------------
72!
73
74!============
75variable_entry:    areacella
76!============
77deflate: 1
78deflate_level: 1
79shuffle: 1
80modeling_realm:    atmos land
81!----------------------------------
82! Variable attributes:
83!----------------------------------
84standard_name:     cell_area
85units:             m2
86long_name:         Atmosphere Grid-Cell Area
87comment:           For atmospheres with more than 1 mesh (e.g., staggered grids), report areas that apply to surface vertical fluxes of energy.
88!----------------------------------
89! Additional variable information:
90!----------------------------------
91dimensions:        longitude latitude
92out_name:          areacella
93type:              real
94!----------------------------------
95!
96
97!============
98variable_entry:    orog
99!============
100deflate: 1
101deflate_level: 1
102shuffle: 1
103modeling_realm:    atmos
104!----------------------------------
105! Variable attributes:
106!----------------------------------
107standard_name:     surface_altitude
108units:             m
109cell_measures:     area: areacella
110long_name:         Surface Altitude
111comment:           height above the geoid; as defined here, ""the geoid"" is a surface of constant geopotential that, if the ocean were at rest, would coincide with mean sea level. Under this definition, the geoid changes as the mean volume of the ocean changes (e.g., due to glacial melt, or global warming of the ocean).  Report here the height above the present-day geoid.  Over ocean, report as 0.0
112!----------------------------------
113! Additional variable information:
114!----------------------------------
115dimensions:        longitude latitude
116out_name:          orog
117type:              real
118valid_min:         -700.0
119valid_max:         10000.0
120!----------------------------------
121!
122
123!============
124variable_entry:    sftlf
125!============
126deflate: 1
127deflate_level: 1
128shuffle: 1
129modeling_realm:    atmos
130!----------------------------------
131! Variable attributes:
132!----------------------------------
133standard_name:     land_area_fraction
134units:             %
135cell_measures:     area: areacella
136long_name:         Land Area Fraction
137comment:           For atmospheres with more than 1 mesh (e.g., staggered grids), report areas that apply to surface vertical fluxes of energy.
138!----------------------------------
139! Additional variable information:
140!----------------------------------
141dimensions:        longitude latitude
142out_name:          sftlf
143type:              real
144valid_min:         0.0
145valid_max:         100.0
146!----------------------------------
147!
148
149!============
150variable_entry:    sftgif
151!============
152deflate: 1
153deflate_level: 1
154shuffle: 1
155modeling_realm:    land
156!----------------------------------
157! Variable attributes:
158!----------------------------------
159standard_name:     land_ice_area_fraction
160units:             %
161cell_measures:     area: areacella
162long_name:         Fraction of Grid Cell Covered with Glacier
163comment:           fraction of grid cell occupied by ""permanent"" ice (i.e., glaciers).  If time varying, report annual values for each year of simulation. For atmospheres with more than 1 mesh (e.g., staggered grids), report areas that apply to surface vertical fluxes of energy.
164!----------------------------------
165! Additional variable information:
166!----------------------------------
167dimensions:        longitude latitude
168out_name:          sftgif
169type:              real
170valid_min:         0.0
171valid_max:         100.0
172!----------------------------------
173!
174
175!============
176variable_entry:    mrsofc
177!============
178deflate: 1
179deflate_level: 1
180shuffle: 1
181modeling_realm:    land
182!----------------------------------
183! Variable attributes:
184!----------------------------------
185standard_name:     soil_moisture_content_at_field_capacity
186units:             kg m-2
187cell_measures:     area: areacella
188long_name:         Capacity of Soil to Store Water
189comment:           """where land"": divide the total water holding capacity of all the soil in the grid cell by the land area in the grid cell;  report as ""missing"" where the land fraction is 0."
190!----------------------------------
191! Additional variable information:
192!----------------------------------
193dimensions:        longitude latitude
194out_name:          mrsofc
195type:              real
196!----------------------------------
197!
198
199!============
200variable_entry:    rootd
201!============
202deflate: 1
203deflate_level: 1
204shuffle: 1
205modeling_realm:    land
206!----------------------------------
207! Variable attributes:
208!----------------------------------
209standard_name:     root_depth
210units:             m
211cell_measures:     area: areacella
212long_name:         Maximum Root Depth
213comment:           report the maximum soil depth reachable by plant roots (if defined in model), i.e., the maximum soil depth from which they can extract moisture; report as ""missing"" where the land fraction is 0.
214!----------------------------------
215! Additional variable information:
216!----------------------------------
217dimensions:        longitude latitude
218out_name:          rootd
219type:              real
220valid_min:         0.0
221valid_max:         30.0
222!----------------------------------
223!
224
Note: See TracBrowser for help on using the repository browser.